Communicate with Supplier? Supplier
Zhou weimin Mr. Zhou weimin
What can I do for you?
Contact Supplier

Used With G70 And G43 Chains - manufacturer, factory, supplier from China

(Total 24 Products for Used With G70 And G43 Chains)

  • G70 AND G43 EYE GRAB HOOK

    G70 AND G43 EYE GRAB HOOK

    • Model No.: 1/4-3/4

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN G43 ULTIMATE LOAD IS 3 TIMES THE WORKING LOAD LIMIT WHILE G70 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT REGULAR MARK G70 1 4 FORGED G43 G43 HIGH TEST

    Contact Now

  • G80 OMEGA LINK WITH BLACK PIN

    G80 OMEGA LINK WITH BLACK PIN

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE FINISH POWDER...

    Contact Now

  • PIN AND BUSH FOR CONNECTING LINKS

    PIN AND BUSH FOR CONNECTING LINKS

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    SPARE PARTS FOR CONNECTING LINKS CONSISTS OF COUPLING PIN AND DOUBLE SLEEVE

    Contact Now

  • G100 OMEGAL LINK WITH HIGH STRENGTH

    G100 OMEGAL LINK WITH HIGH STRENGTH

    • Model No.: 6MM 8MM 10MM 13MM 16MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN 25 STRONGER THAN G80 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE...

    Contact Now

  • G100 MASTER LINK WITH FLAT

    G100 MASTER LINK WITH FLAT

    • Model No.: 13MM 16MM 18MM 23MM 27MM 33MM 36MM 45MM 50MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN 25 STRONGER THAN G80 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE...

    Contact Now

  • G80 Clevis Slip Hook With Cast Latch
  • G70 AND G43 CLEVIS GRAB HOOK

    G70 AND G43 CLEVIS GRAB HOOK

    • Model No.: 1/4-3/4

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN G43 ULTIMATE LOAD IS 3 TIMES THE WORKING LOAD LIMIT WHILE G70 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT REGULAR MARK G70 1 4 FORGED G43 G43 HIGH TEST

    Contact Now

  • G80 CLEVIS CLUTH WITH SAFETY PIN

    G80 CLEVIS CLUTH WITH SAFETY PIN

    • Model No.: 8MM 10MM 13MM

    THIS PRODUCT IS DESIGNED TO BE USED WITH CHAINS IT CAN ADJUST THE LENGTH OF THE CHAINS THE CLEVIS HEAD CAN BE USED WITH OTHER FITTINGS IT ALSO HAVE SAFETY PIN TO ENSURE THE SAFETY IN LIFTING FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD...

    Contact Now

  • G80 CLEVIS SLING HOOK WITH LATCH

    G80 CLEVIS SLING HOOK WITH LATCH

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE FINISH POWDER...

    Contact Now

  • G80 CLEVIS SHORTENING GRAB HOOK WITH SAFETY PIN

    G80 CLEVIS SHORTENING GRAB HOOK WITH SAFETY PIN

    THE HOOK IS NEW TYPE WITH SAFETY PIN THE PIN HAVE SPRING THAT CAN PREVENT GOOD FROM FALLING OFF THE HOOK ALSO HAVE CRADLES THAT CAN SHORTENING THE CHAINS THE BODY OF THE HOOK IS QUITE STRONG FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD...

    Contact Now

  • G80 LASHING TYPE C HOOK WITH SPRING PIN

    G80 LASHING TYPE C HOOK WITH SPRING PIN

    • Model No.: 9MM 11MM 13MM

    SUITABLE FOR G80 LASHING CHAIN FEATURES QUICK AND EASY ASSEMBLY FORGED ALLOY STEEL REGULAR MARK 9MM CE

    Contact Now

  • FORGED GRAB HOOK WITH SWIVEL

    FORGED GRAB HOOK WITH SWIVEL

    • Model No.: 3.8T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED LARGE TROAT OPENING AND SMALL CROSS AREA HIGH STRENGTH AND GOOD DUCTILITY ONLY FOR GENERAL HOIST NOT FOR OVERHEAD LIFTING ULTIMATE LOAD IS 2 TIMES THE WORKING LOAD LIMIT REGULAR MARK 8MM WLL3

    Contact Now

  • ALLOY EYE HOOK WITH LATCH

    ALLOY EYE HOOK WITH LATCH

    • Model No.: 3T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED LARGE TROAT OPENING AND SMALL CROSS AREA HIGH STRENGTH AND GOOD DUCTILITY ONLY FOR GENERAL HOIST NOT FOR OVERHEAD LIFTING ULTIMATE LOAD IS 2 TIMES THE WORKING LOAD LIMIT REGULAR MARK WLL3T CE

    Contact Now

  • LARGE OPENING HOOK WITH SAFETY LATCH

    LARGE OPENING HOOK WITH SAFETY LATCH

    • Model No.: 3.2T 3.1T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED LARGE TROAT OPENING AND SMALL CROSS AREA HIGH STRENGTH AND GOOD DUCTILITY ONLY FOR GENERAL HOIST NOT FOR OVERHEAD LIFTING ULTIMATE LOAD IS 2 TIMES THE WORKING LOAD

    Contact Now

  • SWIVEL CONNECTOR WITH BEARING

    SWIVEL CONNECTOR WITH BEARING

    • Model No.: 6T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED FOR LOGGING USAGE WITH STEEL WIRE ROPES REGULAR MARK 8MM WLL2T ULTIMATE LOAD IS 5 TIMES THE WORKING LOAD

    Contact Now

  • EYE BEND HOOK LASHING AND PULLING

    EYE BEND HOOK LASHING AND PULLING

    • Model No.: 1.86T 2T 5T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED FORGED ALLOY STEEL QUENCHED AND TEMPERED ONLY FOR LASHING AND PULLING NOT FOR LIFTING REGULAR MARK

    Contact Now

  • FORGED BARREL HOOK 1T AND 2T

    FORGED BARREL HOOK 1T AND 2T

    • Model No.: 1T 2T

    FORGED CARBON STEEL QUENCHED AND TEMPERED ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT REGULAR MARK WLL1T THE HOOK IS USED TO LIFT DRUMS AND

    Contact Now

  • FORGED SHANK HOOK ALLOY AND CARBON STEEL

    FORGED SHANK HOOK ALLOY AND CARBON STEEL

    • Model No.: 0.75T TO 15T

    AVAILABLE IN CARBON STEEL AND ALLOY STEEL FORGED QUENCHED AND TEMPERED ALLOY STEEL ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT CARBON STEEL ULTIMATE LOAD IS 5 TIMES THE WORKING LOAD LIMIT THE HOOK HAVE SHANK AND

    Contact Now

  • A322 FROGED SWIVEL HOOK WITH BEARING

    A322 FROGED SWIVEL HOOK WITH BEARING

    • Model No.: 0.75T-30T

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN BREAKING LOAD IS CARBON STEEL 5 TIMES THE WLL ALLOY STEEL 5 TIMES THE WLL REGULAR MARK ALLOY WLL1T OR

    Contact Now

  • A320 EYE HOIST HOOK WITH LATCH

    A320 EYE HOIST HOOK WITH LATCH

    • Model No.: 0.75T-30T

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN BREAKING LOAD IS 5 TIMES THE WLL REGULAR MARK ALLOY WLL1T OR

    Contact Now

  • G43 AND G70 EYE HOOK

    G43 AND G70 EYE HOOK

    • Model No.: 1/4-3/4

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN G43 ULTIMATE LOAD IS 3 TIMES THE WORKING LOAD LIMIT WHILE G70 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT REGULAR MARK G70 1 4 FORGED G43 G43 HIGH TEST

    Contact Now

  • G70 AND G43 CLEVIS SLIP HOOK

    G70 AND G43 CLEVIS SLIP HOOK

    • Model No.: 1/4-3/4

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN G43 ULTIMATE LOAD IS 3 TIMES THE WORKING LOAD LIMIT WHILE G70 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT REGULAR MARK G70 1 4 FORGED G43 G43 HIGH TEST

    Contact Now

  • G43 AND G70 CLEVIS SLIP HOOK WITH LATCH

    G43 AND G70 CLEVIS SLIP HOOK WITH LATCH

    • Model No.: 1/4-3/4

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN G43 ULTIMATE LOAD IS 3 TIMES THE WORKING LOAD LIMIT WHILE G70 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT REGULAR MARK G70 1 4 FORGED G43 G43 HIGH TEST

    Contact Now

  • G80 CLEVIS GRAB HOOK WITH CRADLE

    G80 CLEVIS GRAB HOOK WITH CRADLE

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    MADE OF HIGH TENSILE STEEL GRAB HOOKS HAVE A STRONG BODY AND NARROW OPENNING THE HOOK HAVE CRADLES AT THE TWO SIDES SO IT CAN MATCH WITH LIFTING CHAINS PERFECTLY FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TEST AT 1 5 TIMES...

    Contact Now

Review

Mrs.charity

Apr 28, 2020 5

The manufacturer of Used With G70 And G43 Chains is great! Recommend!!!!
Mr Matolin

Apr 21, 2020 5

Used With G70 And G43 Chains received with well package.Thanks manufacturer.
Shoujat Ali Khan

Apr 18, 2020 5

seller is very responsible and Used With G70 And G43 Chains is shipping fast.
"Sincerity, Innovation, Rigorousness, and Efficiency" will be the persistent conception of our company to the long-term to establish together with customers for mutual reciprocity and mutual gain for Used With G70 And G43 Chains , USED WITH G70 AND G43 CHAINS , G80 Anchor Chain , guide and negotiate.
"Our solutions are greatly recognized and reliable by customers and will fulfill continuously altering financial and social requirements for Used With G70 And G43 Chains , USED WITH G70 AND G43 CHAINS , G80 Anchor Chain , "Good quality and reasonable price" are our business principles. If you are interested in our solutions or have any questions remember to feel free to contact us. We hope to establish cooperative relationships with you in the near future.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List