Communicate with Supplier? Supplier
Zhou weimin Mr. Zhou weimin
What can I do for you?
Contact Supplier

Slding Type With Safety Latch - manufacturer, factory, supplier from China

(Total 24 Products for Slding Type With Safety Latch)

  • G80 SLIDING EYE CHOKER HOOK

    G80 SLIDING EYE CHOKER HOOK

    • Model No.: 3/8"-1/2" 5/8" 3/4" 1"

    THE HOOK HAVE A SLIDING EYE THAT CAN BE ASSEMBLIED WITH STEEL WIRE ROPE THE HOOK IS MAINLY USED IN CUTTING DOWN FORESTS THE HOOK IS QUITE STRONG FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TEST AT 1 5 TIMES WORKING LOAD...

    Contact Now

  • G80 OMEGA LINK WITH BLACK PIN

    G80 OMEGA LINK WITH BLACK PIN

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE FINISH POWDER...

    Contact Now

  • G100 OMEGAL LINK WITH HIGH STRENGTH

    G100 OMEGAL LINK WITH HIGH STRENGTH

    • Model No.: 6MM 8MM 10MM 13MM 16MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN 25 STRONGER THAN G80 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE...

    Contact Now

  • G100 MASTER LINK WITH FLAT

    G100 MASTER LINK WITH FLAT

    • Model No.: 13MM 16MM 18MM 23MM 27MM 33MM 36MM 45MM 50MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN 25 STRONGER THAN G80 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE...

    Contact Now

  • G80 Clevis Slip Hook With Cast Latch
  • ALLOY FORGED HOOK FISHING TYPE

    ALLOY FORGED HOOK FISHING TYPE

    • Model No.: 3T-20T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED FOR FISHING USAGE REGULAR MARK WLL8T CE ULTIMATE LOAD IS 5 TIMES THE WORKING LOAD

    Contact Now

  • G80 CLEVIS CLUTH WITH SAFETY PIN

    G80 CLEVIS CLUTH WITH SAFETY PIN

    • Model No.: 8MM 10MM 13MM

    THIS PRODUCT IS DESIGNED TO BE USED WITH CHAINS IT CAN ADJUST THE LENGTH OF THE CHAINS THE CLEVIS HEAD CAN BE USED WITH OTHER FITTINGS IT ALSO HAVE SAFETY PIN TO ENSURE THE SAFETY IN LIFTING FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD...

    Contact Now

  • G80 MASTER LINK ASSEMBLY U.S TYPE A-343

    G80 MASTER LINK ASSEMBLY U.S TYPE A-343

    • Model No.: 3/4" TO 2-3/4"

    MADE OF HIGH TENSILE ALLOY STEELS QUENCHED AND TEMPERED EVERY PIECE WILL BE PROOF TESTED AT 2 TIMES THE WORKING LOAD LIMIT 100 MAGNAFLUX CRACK DETECTION THE SURFACES ARE USUALLY YELLOW PAINTED AND RED PAINTED WHILE CUSTOMERS CAN CHOOSE OTHER COLORS ACCORDING TO RAL COLORS THE LINKS CAN BE ALSO PRESSED WITH FLAT ON...

    Contact Now

  • G80 U.S TYPE FORGED MASTER LINK

    G80 U.S TYPE FORGED MASTER LINK

    • Model No.: 1/2", 5/8" 3/4", 2"

    MADE OF HIGH TENSILE ALLOY STEELS QUENCHED AND TEMPERED EVERY PIECE WILL BE PROOF TESTED AT 2 TIMES THE WORKING LOAD LIMIT 100 MAGNAFLUX CRACK DETECTION THE SURFACES ARE USUALLY YELLOW PAINTED AND RED PAINTED WHILE CUSTOMERS CAN CHOOSE OTHER COLORS ACCORDING TO RAL COLORS THE LINKS CAN BE ALSO PRESSED WITH FLAT ON...

    Contact Now

  • G80 CLEVIS SLING HOOK WITH LATCH

    G80 CLEVIS SLING HOOK WITH LATCH

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE FINISH POWDER...

    Contact Now

  • G80 CLEVIS SHORTENING GRAB HOOK WITH SAFETY PIN

    G80 CLEVIS SHORTENING GRAB HOOK WITH SAFETY PIN

    THE HOOK IS NEW TYPE WITH SAFETY PIN THE PIN HAVE SPRING THAT CAN PREVENT GOOD FROM FALLING OFF THE HOOK ALSO HAVE CRADLES THAT CAN SHORTENING THE CHAINS THE BODY OF THE HOOK IS QUITE STRONG FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD...

    Contact Now

  • G80 LASHING TYPE C HOOK WITH SPRING PIN

    G80 LASHING TYPE C HOOK WITH SPRING PIN

    • Model No.: 9MM 11MM 13MM

    SUITABLE FOR G80 LASHING CHAIN FEATURES QUICK AND EASY ASSEMBLY FORGED ALLOY STEEL REGULAR MARK 9MM CE

    Contact Now

  • FORGED GRAB HOOK WITH SWIVEL

    FORGED GRAB HOOK WITH SWIVEL

    • Model No.: 3.8T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED LARGE TROAT OPENING AND SMALL CROSS AREA HIGH STRENGTH AND GOOD DUCTILITY ONLY FOR GENERAL HOIST NOT FOR OVERHEAD LIFTING ULTIMATE LOAD IS 2 TIMES THE WORKING LOAD LIMIT REGULAR MARK 8MM WLL3

    Contact Now

  • ALLOY EYE HOOK WITH LATCH

    ALLOY EYE HOOK WITH LATCH

    • Model No.: 3T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED LARGE TROAT OPENING AND SMALL CROSS AREA HIGH STRENGTH AND GOOD DUCTILITY ONLY FOR GENERAL HOIST NOT FOR OVERHEAD LIFTING ULTIMATE LOAD IS 2 TIMES THE WORKING LOAD LIMIT REGULAR MARK WLL3T CE

    Contact Now

  • LARGE OPENING HOOK WITH SAFETY LATCH

    LARGE OPENING HOOK WITH SAFETY LATCH

    • Model No.: 3.2T 3.1T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED LARGE TROAT OPENING AND SMALL CROSS AREA HIGH STRENGTH AND GOOD DUCTILITY ONLY FOR GENERAL HOIST NOT FOR OVERHEAD LIFTING ULTIMATE LOAD IS 2 TIMES THE WORKING LOAD

    Contact Now

  • SWIVEL CONNECTOR WITH BEARING

    SWIVEL CONNECTOR WITH BEARING

    • Model No.: 6T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED FOR LOGGING USAGE WITH STEEL WIRE ROPES REGULAR MARK 8MM WLL2T ULTIMATE LOAD IS 5 TIMES THE WORKING LOAD

    Contact Now

  • A322 FROGED SWIVEL HOOK WITH BEARING

    A322 FROGED SWIVEL HOOK WITH BEARING

    • Model No.: 0.75T-30T

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN BREAKING LOAD IS CARBON STEEL 5 TIMES THE WLL ALLOY STEEL 5 TIMES THE WLL REGULAR MARK ALLOY WLL1T OR

    Contact Now

  • A320 EYE HOIST HOOK WITH LATCH

    A320 EYE HOIST HOOK WITH LATCH

    • Model No.: 0.75T-30T

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN BREAKING LOAD IS 5 TIMES THE WLL REGULAR MARK ALLOY WLL1T OR

    Contact Now

  • G43 AND G70 CLEVIS SLIP HOOK WITH LATCH

    G43 AND G70 CLEVIS SLIP HOOK WITH LATCH

    • Model No.: 1/4-3/4

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN G43 ULTIMATE LOAD IS 3 TIMES THE WORKING LOAD LIMIT WHILE G70 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT REGULAR MARK G70 1 4 FORGED G43 G43 HIGH TEST

    Contact Now

  • HIGH TENSILE  BOLT TYPE DEE SHACKLE

    HIGH TENSILE BOLT TYPE DEE SHACKLE

    • Model No.: 1/4 TO 2-1/2

    FOR LIFTING APPLICATION FORGED QUENCHED AND TEMPERED BOW BODY FURFISH HOT DIP GALVANIZING OR ELECTRIO GALVANIZING NUT SURFACE FINISH ELECTRO GALVANIZING BOLT SURFACE FINISH HOT DIP GALVANIZING ELECTOR GALVANIZING OR POWDER PLASTIFIED REGULAR MARKING IS SIZE WLL CE SLR ULTIMATE LOAD IS 6 TIMES THE WORKING LOAD LIMIT...

    Contact Now

  • HIGH TENSILE STRENGTH BOLT TYPE SHACKLE

    HIGH TENSILE STRENGTH BOLT TYPE SHACKLE

    • Model No.: 1/4 TO 2-1/2

    FOR LIFTING APPLICATION FORGED QUENCHED AND TEMPERED BOW BODY FURFISH HOT DIP GALVANIZING OR ELECTRIO GALVANIZING NUT SURFACE FINISH ELECTRO GALVANIZING BOLT SURFACE FINISH HOT DIP GALVANIZING ELECTOR GALVANIZING OR POWDER PLASTIFIED REGULAR MARKING IS SIZE WLL CE SLR ULTIMATE LOAD IS 6 TIMES THE WORKING LOAD LIMIT...

    Contact Now

  • HIGH STRENGTH BOLT TYPE BOW SHACKLE

    HIGH STRENGTH BOLT TYPE BOW SHACKLE

    • Model No.: 1/4 TO 2-1/2

    FOR LIFTING APPLICATION FORGED QUENCHED AND TEMPERED BOW BODY FURFISH HOT DIP GALVANIZING OR ELECTRIO GALVANIZING NUT SURFACE FINISH ELECTRO GALVANIZING BOLT SURFACE FINISH HOT DIP GALVANIZING ELECTOR GALVANIZING OR POWDER PLASTIFIED REGULAR MARKING IS SIZE WLL CE SLR ULTIMATE LOAD IS 6 TIMES THE WORKING LOAD

    Contact Now

  • G8 BOLT TYPE ALLOY DEE SHACKLE

    G8 BOLT TYPE ALLOY DEE SHACKLE

    • Model No.: 7/8-2

    BODY IS MADE OF SUPER ALLOY STEEL QUENCHED AND TEMPERD THE SHACKLES ARE WITH STRONG BOLT NUT AND COLLAR PIN TO ENSURE THE SAFETY CONNECTING BREAKAGE TESTED FOR EVERY BATCH 100 MAGNAFLUX CRACK DETECTION PERMITTED USEFUL TEMPERATURE RANGE 40O 2000 ULTIMATE LOAD IS 5 TIMES THE WORKING LOAD

    Contact Now

  • G8 BOLT TYPE ALLOY BOW SHACKLE

    G8 BOLT TYPE ALLOY BOW SHACKLE

    • Model No.: 7/8 TO 2"

    BODY IS MADE OF SUPER ALLOY STEEL QUENCHED AND TEMPERD THE SHACKLES ARE WITH STRONG BOLT NUT AND COLLAR PIN TO ENSURE THE SAFETY CONNECTING BREAKAGE TESTED FOR EVERY BATCH 100 MAGNAFLUX CRACK DETECTION PERMITTED USEFUL TEMPERATURE RANGE 40O 2000 ULTIMATE LOAD IS 5 TIMES THE WORKING LOAD

    Contact Now

Review

Zebedeo Sauñe

Apr 18, 2020 5

nice product, quick delivery, and excellent user support! Shandong Shenli Rigging Co.,LTD. team is very good!
Mr.samir Mohammad

Apr 10, 2020 5

Very nice product, prompt shipping.Recommend Shandong Shenli Rigging Co.,LTD. company!
David Rae

Apr 05, 2020 5

I have to say this Slding Type With Safety Latch is brilliant, and the this company have the most helpful service with introductions. I would like to recommend this Shandong Shenli Rigging Co.,LTD. to my friends.
Our mission is to help you create long-lasting relationships with your clients through the power of promotional products. for Slding Type With Safety Latch , lifting hook with safety latch , lifting hook without safety latch , we assure you of our best awareness at all times.
With our outstanding administration, powerful technical capability and strict top quality handle procedure, we go on to provide our purchasers with reliable good quality, reasonable selling prices and excellent services. We goal at becoming certainly one of your most responsible partners and earning your gratification for Slding Type With Safety Latch , lifting hook with safety latch , lifting hook without safety latch , We strongly believe that technology and service is our base today and quality will create our reliable walls of future. Only we've got better and better quality could we achieve our customers and ourselves too. Welcome customers all over the word to contact us for getting further business and reliable relationships. We have been always here working for your demands whenever you require.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List