Communicate with Supplier? Supplier
Zhou weimin Mr. Zhou weimin
What can I do for you?
Contact Supplier

Manual Lifting Hook - manufacturer, factory, supplier from China

(Total 24 Products for Manual Lifting Hook)

  • G80 LARGE OPENNING EYE HOOK

    G80 LARGE OPENNING EYE HOOK

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE FINISH POWDER...

    Contact Now

  • FORGED SORTING HOOK RED PAINTED

    FORGED SORTING HOOK RED PAINTED

    • Model No.: 2T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT WOKRING LOAD LIMIT AT THE TIP OF THE HOOK IS 2T WORKING LAOD LIMIT AT THE BOTTOM OF HOOK IS 6 8T REGULAR MARK IS

    Contact Now

  • G80 Clevis Slip Hook With Cast Latch
  • ROUND REVERSE EYE HOOK

    ROUND REVERSE EYE HOOK

    • Model No.: 1.5T 2T

    FORGED CARBON STEEL QUENCHED AND TEMPERED NOT FOR LIFTING REGULAR MARK WLL1

    Contact Now

  • ALLOY FORGED HOOK FISHING TYPE

    ALLOY FORGED HOOK FISHING TYPE

    • Model No.: 3T-20T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED FOR FISHING USAGE REGULAR MARK WLL8T CE ULTIMATE LOAD IS 5 TIMES THE WORKING LOAD

    Contact Now

  • G70 AND G43 EYE GRAB HOOK

    G70 AND G43 EYE GRAB HOOK

    • Model No.: 1/4-3/4

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN G43 ULTIMATE LOAD IS 3 TIMES THE WORKING LOAD LIMIT WHILE G70 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT REGULAR MARK G70 1 4 FORGED G43 G43 HIGH TEST

    Contact Now

  • G70 AND G43 CLEVIS GRAB HOOK

    G70 AND G43 CLEVIS GRAB HOOK

    • Model No.: 1/4-3/4

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN G43 ULTIMATE LOAD IS 3 TIMES THE WORKING LOAD LIMIT WHILE G70 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT REGULAR MARK G70 1 4 FORGED G43 G43 HIGH TEST

    Contact Now

  • G80 DEEP THROAT CLEVIS GRAB HOOK

    G80 DEEP THROAT CLEVIS GRAB HOOK

    • Model No.: 6MM 8MM 10MM 13MM

    THE HOOK HAVE A DEEP THROAT IT S QUITE SAFE WHEN LIFTING THE BODY OF THE HOOK IS QUITE STRONG THE HOOK ALSO HAVE CRADLES THAT CAN ADJUST THE LENGTH OF THE CHAINS FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TEST AT 1 5 TIMES...

    Contact Now

  • G80 IMPROVED SWIVEL SELFLOCK HOOK

    G80 IMPROVED SWIVEL SELFLOCK HOOK

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    MADE OF HIGH TENSILE STEEL SAFETY HOOK HAVE A STRONG LATCH THAT CAN PROTECT THE PRODUCT FALLING OFF THE HOOK HAVE SAFETY FITTINGS THAT CAN BE CHANGED EASILY THE HOOK CAN BE SWIVEL AT 360 DEGREE WE MAKE A NEW DESIGN TO MAKE SURE THE HOOK WILL NOT CLOSE WHEN IT IS OPENED SO IT S QUITE CONVINIENT TO OPERATE AND IT S MORE...

    Contact Now

  • G80 IMPROVED CLEVIS SELFLOCK HOOK

    G80 IMPROVED CLEVIS SELFLOCK HOOK

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    MADE OF HIGH TENSILE STEEL SAFETY HOOK HAVE A STRONG LATCH THAT CAN PROTECT THE PRODUCT FALLING OFF THE HOOK HAVE SAFETY FITTINGS THAT CAN BE CHANGED EASILY FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TEST AT 1 5 TIMES...

    Contact Now

  • G80 CLEVIS SLING HOOK WITH LATCH

    G80 CLEVIS SLING HOOK WITH LATCH

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE FINISH POWDER...

    Contact Now

  • A339 G80 Clevis Sling Hoist Hook
  • Rigging G80 Lifting Screw Point/Lifting Points

    Rigging G80 Lifting Screw Point/Lifting Points

    The Size Of A Pallet Is 1 05 0 9 1M And 60CTNS Sacks Or Two Orin Drums Per Pallet Or Wooden

    Contact Now

  • G80 CLEVIS SHORTENING GRAB HOOK WITH SAFETY PIN

    G80 CLEVIS SHORTENING GRAB HOOK WITH SAFETY PIN

    THE HOOK IS NEW TYPE WITH SAFETY PIN THE PIN HAVE SPRING THAT CAN PREVENT GOOD FROM FALLING OFF THE HOOK ALSO HAVE CRADLES THAT CAN SHORTENING THE CHAINS THE BODY OF THE HOOK IS QUITE STRONG FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD...

    Contact Now

  • G80 CONTAINER LIFTING CLEVIS LINK

    G80 CONTAINER LIFTING CLEVIS LINK

    • Model No.: 5.3T

    FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR WEB SLING AND G80 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TESTED AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION SURFACE ARE USUALLY YELLOW AND RED ULTIMATE LOAD IS 4 TIMES THE...

    Contact Now

  • G80 CONTAINER LIFTING PRODUCT

    G80 CONTAINER LIFTING PRODUCT

    • Model No.: 12.5T

    FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR WEB SLING AND G80 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TESTED AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION SURFACE ARE USUALLY YELLOW AND RED ULTIMATE LOAD IS 4 TIMES THE...

    Contact Now

  • G80 LASHING TYPE C HOOK WITH SPRING PIN

    G80 LASHING TYPE C HOOK WITH SPRING PIN

    • Model No.: 9MM 11MM 13MM

    SUITABLE FOR G80 LASHING CHAIN FEATURES QUICK AND EASY ASSEMBLY FORGED ALLOY STEEL REGULAR MARK 9MM CE

    Contact Now

  • FORGED GRAB HOOK WITH SWIVEL

    FORGED GRAB HOOK WITH SWIVEL

    • Model No.: 3.8T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED LARGE TROAT OPENING AND SMALL CROSS AREA HIGH STRENGTH AND GOOD DUCTILITY ONLY FOR GENERAL HOIST NOT FOR OVERHEAD LIFTING ULTIMATE LOAD IS 2 TIMES THE WORKING LOAD LIMIT REGULAR MARK 8MM WLL3

    Contact Now

  • LARGE OPENING HOOK LONG BODY

    LARGE OPENING HOOK LONG BODY

    • Model No.: 1.5T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED LARGE TROAT OPENING AND SMALL CROSS AREA HIGH STRENGTH AND GOOD DUCTILITY ONLY FOR GENERAL HOIST NOT FOR OVERHEAD LIFTING ULTIMATE LOAD IS 2 TIMES THE WORKING LOAD LIMIT REGULAR MARK WLL3T CE

    Contact Now

  • ALLOY EYE HOOK WITH LATCH

    ALLOY EYE HOOK WITH LATCH

    • Model No.: 3T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED LARGE TROAT OPENING AND SMALL CROSS AREA HIGH STRENGTH AND GOOD DUCTILITY ONLY FOR GENERAL HOIST NOT FOR OVERHEAD LIFTING ULTIMATE LOAD IS 2 TIMES THE WORKING LOAD LIMIT REGULAR MARK WLL3T CE

    Contact Now

  • LARGE OPENING HOOK WITH SAFETY LATCH

    LARGE OPENING HOOK WITH SAFETY LATCH

    • Model No.: 3.2T 3.1T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED LARGE TROAT OPENING AND SMALL CROSS AREA HIGH STRENGTH AND GOOD DUCTILITY ONLY FOR GENERAL HOIST NOT FOR OVERHEAD LIFTING ULTIMATE LOAD IS 2 TIMES THE WORKING LOAD

    Contact Now

  • EYE BEND HOOK LASHING AND PULLING

    EYE BEND HOOK LASHING AND PULLING

    • Model No.: 1.86T 2T 5T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED FORGED ALLOY STEEL QUENCHED AND TEMPERED ONLY FOR LASHING AND PULLING NOT FOR LIFTING REGULAR MARK

    Contact Now

  • FORGED BARREL HOOK 1T AND 2T

    FORGED BARREL HOOK 1T AND 2T

    • Model No.: 1T 2T

    FORGED CARBON STEEL QUENCHED AND TEMPERED ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT REGULAR MARK WLL1T THE HOOK IS USED TO LIFT DRUMS AND

    Contact Now

  • FORGED SHANK HOOK ALLOY AND CARBON STEEL

    FORGED SHANK HOOK ALLOY AND CARBON STEEL

    • Model No.: 0.75T TO 15T

    AVAILABLE IN CARBON STEEL AND ALLOY STEEL FORGED QUENCHED AND TEMPERED ALLOY STEEL ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT CARBON STEEL ULTIMATE LOAD IS 5 TIMES THE WORKING LOAD LIMIT THE HOOK HAVE SHANK AND

    Contact Now

Review

Chris Parker

Apr 26, 2020 5

All very good! the seller is very sociable and quickly respond to all questions!
Ozgur Yilmazel

Apr 25, 2020 5

Got for good price, really different from other Manual Lifting Hook we purchased.
Mr.peter Uli

Apr 06, 2020 4

Great! Thanks manufacturer.
We insist on offering high-quality output with superior small business concept, honest profits along with the best and fast service. it will bring you not only the top quality product and huge profit, but one of the most significant will be to occupy the endless market for Manual Lifting Hook , manual lifting hook , Lifting Hook , For further inquires please do not hesitate to contact us. Thank you - Your support continuously inspires us.
In an effort to provide you advantage and enlarge our business enterprise, we even have inspectors in QC Staff and assure you our greatest provider and item for Manual Lifting Hook , manual lifting hook , Lifting Hook , In the future we promise to keep offer the high quality and more cost-effective products the more efficient after sales service to our all customers all over the world for the common development and the higher benefit.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List