Communicate with Supplier? Supplier
Zhou weimin Mr. Zhou weimin
What can I do for you?
Contact Supplier

Lifting Purpose To Be Used With En818 2 Chains - manufacturer, factory, supplier from China

(Total 24 Products for Lifting Purpose To Be Used With En818 2 Chains)

  • G80 OMEGA LINK WITH BLACK PIN

    G80 OMEGA LINK WITH BLACK PIN

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE FINISH POWDER...

    Contact Now

  • G100 OMEGAL LINK WITH HIGH STRENGTH

    G100 OMEGAL LINK WITH HIGH STRENGTH

    • Model No.: 6MM 8MM 10MM 13MM 16MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN 25 STRONGER THAN G80 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE...

    Contact Now

  • G100 MASTER LINK WITH FLAT

    G100 MASTER LINK WITH FLAT

    • Model No.: 13MM 16MM 18MM 23MM 27MM 33MM 36MM 45MM 50MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN 25 STRONGER THAN G80 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE...

    Contact Now

  • G80 Clevis Slip Hook With Cast Latch
  • CONNECTOR FOR LOGGING ALLOY STEEL

    CONNECTOR FOR LOGGING ALLOY STEEL

    • Model No.: 2T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED FOR LOGGING USAGE WITH STEEL WIRE ROPES REGULAR MARK 8MM WLL2T ULTIMATE LOAD IS 5 TIMES THE WORKING LOAD

    Contact Now

  • G80 CLEVIS CLUTH WITH SAFETY PIN

    G80 CLEVIS CLUTH WITH SAFETY PIN

    • Model No.: 8MM 10MM 13MM

    THIS PRODUCT IS DESIGNED TO BE USED WITH CHAINS IT CAN ADJUST THE LENGTH OF THE CHAINS THE CLEVIS HEAD CAN BE USED WITH OTHER FITTINGS IT ALSO HAVE SAFETY PIN TO ENSURE THE SAFETY IN LIFTING FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD...

    Contact Now

  • G80 CLEVIS SLING HOOK WITH LATCH

    G80 CLEVIS SLING HOOK WITH LATCH

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE FINISH POWDER...

    Contact Now

  • Rigging G80 Lifting Screw Point/Lifting Points

    Rigging G80 Lifting Screw Point/Lifting Points

    The Size Of A Pallet Is 1 05 0 9 1M And 60CTNS Sacks Or Two Orin Drums Per Pallet Or Wooden

    Contact Now

  • G80 CLEVIS SHORTENING GRAB HOOK WITH SAFETY PIN

    G80 CLEVIS SHORTENING GRAB HOOK WITH SAFETY PIN

    THE HOOK IS NEW TYPE WITH SAFETY PIN THE PIN HAVE SPRING THAT CAN PREVENT GOOD FROM FALLING OFF THE HOOK ALSO HAVE CRADLES THAT CAN SHORTENING THE CHAINS THE BODY OF THE HOOK IS QUITE STRONG FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD...

    Contact Now

  • G80 CONTAINER LIFTING CLEVIS LINK

    G80 CONTAINER LIFTING CLEVIS LINK

    • Model No.: 5.3T

    FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR WEB SLING AND G80 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TESTED AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION SURFACE ARE USUALLY YELLOW AND RED ULTIMATE LOAD IS 4 TIMES THE...

    Contact Now

  • G80 CONTAINER LIFTING PRODUCT

    G80 CONTAINER LIFTING PRODUCT

    • Model No.: 12.5T

    FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR WEB SLING AND G80 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TESTED AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION SURFACE ARE USUALLY YELLOW AND RED ULTIMATE LOAD IS 4 TIMES THE...

    Contact Now

  • G80 LASHING TYPE C HOOK WITH SPRING PIN

    G80 LASHING TYPE C HOOK WITH SPRING PIN

    • Model No.: 9MM 11MM 13MM

    SUITABLE FOR G80 LASHING CHAIN FEATURES QUICK AND EASY ASSEMBLY FORGED ALLOY STEEL REGULAR MARK 9MM CE

    Contact Now

  • FORGED GRAB HOOK WITH SWIVEL

    FORGED GRAB HOOK WITH SWIVEL

    • Model No.: 3.8T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED LARGE TROAT OPENING AND SMALL CROSS AREA HIGH STRENGTH AND GOOD DUCTILITY ONLY FOR GENERAL HOIST NOT FOR OVERHEAD LIFTING ULTIMATE LOAD IS 2 TIMES THE WORKING LOAD LIMIT REGULAR MARK 8MM WLL3

    Contact Now

  • ALLOY EYE HOOK WITH LATCH

    ALLOY EYE HOOK WITH LATCH

    • Model No.: 3T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED LARGE TROAT OPENING AND SMALL CROSS AREA HIGH STRENGTH AND GOOD DUCTILITY ONLY FOR GENERAL HOIST NOT FOR OVERHEAD LIFTING ULTIMATE LOAD IS 2 TIMES THE WORKING LOAD LIMIT REGULAR MARK WLL3T CE

    Contact Now

  • LARGE OPENING HOOK WITH SAFETY LATCH

    LARGE OPENING HOOK WITH SAFETY LATCH

    • Model No.: 3.2T 3.1T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED LARGE TROAT OPENING AND SMALL CROSS AREA HIGH STRENGTH AND GOOD DUCTILITY ONLY FOR GENERAL HOIST NOT FOR OVERHEAD LIFTING ULTIMATE LOAD IS 2 TIMES THE WORKING LOAD

    Contact Now

  • SWIVEL CONNECTOR WITH BEARING

    SWIVEL CONNECTOR WITH BEARING

    • Model No.: 6T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED FOR LOGGING USAGE WITH STEEL WIRE ROPES REGULAR MARK 8MM WLL2T ULTIMATE LOAD IS 5 TIMES THE WORKING LOAD

    Contact Now

  • EYE BEND HOOK LASHING AND PULLING

    EYE BEND HOOK LASHING AND PULLING

    • Model No.: 1.86T 2T 5T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED FORGED ALLOY STEEL QUENCHED AND TEMPERED ONLY FOR LASHING AND PULLING NOT FOR LIFTING REGULAR MARK

    Contact Now

  • A322 FROGED SWIVEL HOOK WITH BEARING

    A322 FROGED SWIVEL HOOK WITH BEARING

    • Model No.: 0.75T-30T

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN BREAKING LOAD IS CARBON STEEL 5 TIMES THE WLL ALLOY STEEL 5 TIMES THE WLL REGULAR MARK ALLOY WLL1T OR

    Contact Now

  • A320 EYE HOIST HOOK WITH LATCH

    A320 EYE HOIST HOOK WITH LATCH

    • Model No.: 0.75T-30T

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN BREAKING LOAD IS 5 TIMES THE WLL REGULAR MARK ALLOY WLL1T OR

    Contact Now

  • G43 AND G70 CLEVIS SLIP HOOK WITH LATCH

    G43 AND G70 CLEVIS SLIP HOOK WITH LATCH

    • Model No.: 1/4-3/4

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN G43 ULTIMATE LOAD IS 3 TIMES THE WORKING LOAD LIMIT WHILE G70 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT REGULAR MARK G70 1 4 FORGED G43 G43 HIGH TEST

    Contact Now

  • GRADE 80 LIFTING POINT

    GRADE 80 LIFTING POINT

    • Model No.: M6-M48

    FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED 100 MAGNAFLUX CRACK DETECTION BREAKAGE TEST SURFACE FINISH ELECTRO GALVANIZING POWDER PLASTIFIED SAFETY FACTOR 4 1 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT NEVER EXCEED WORKING LOAD LIMIT REGULAR MARK M8 WLL1T CE SLR BATCH

    Contact Now

  • LIFTING RING FOR CONSTRUCTION

    LIFTING RING FOR CONSTRUCTION

    • Model No.: 4T

    100 MAGNAFLUX CRACK DETECTION BREAKAGE TEST SURFACE FINISH ELECTRO GALVANIZING POWDER PLASTIFIED SAFETY FACTOR 4 1 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT NEVER EXCEED WORKING LOAD

    Contact Now

  • CONCRETE PRECAST ELEMENT LIFTING

    CONCRETE PRECAST ELEMENT LIFTING

    • Model No.: 1-1.3T; 1.5-2.5T

    COMPONENT A CAST SUPER ALLOY COMPONENT B FORGED ALLOY STEEL 100 MAGNAFLUX CRACK DETECTION BREAKAGE TEST SURFACE FINISH ELECTRO GALVANIZING POWDER PLASTIFIED SAFETY FACTOR 4 1 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT CAST COMPONENT 1 1 3T FORGED COMPONENT WLL1 1 3T CE SLR BATCH NUMBER NEVER EXCEED WORKING LOAD...

    Contact Now

  • G80 SHACKLES FOR LIFTING PURPOSE

    G80 SHACKLES FOR LIFTING PURPOSE

    • Model No.: 7/8MM,10MM,13MM,16MM

    LOW WEIGHT HIGH STRENGH FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 G80 CHAIN INDIVIDUALLOY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TESTED AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE INDIVIDUALLY INSPECTED AND TESTED SURFACE FINISH...

    Contact Now

Review

Alexander Pama

Mar 30, 2020 5

The Lifting Purpose To Be Used With En818 2 Chains was very well packaged.
Mr.fabian Leon

Mar 19, 2020 5

BIG THANKS TO THE SUPPLIER, AND FOR THE ASSISTANCE WAS VERY HELPFUL, I RECEID MY Lifting Purpose To Be Used With En818 2 Chains QUICK WELL PACK WITH ITEMS.
Kim Young Ho

Mar 13, 2020 5

Lifting Purpose To Be Used With En818 2 Chains came this week.Fit the description.Recommend.
With our leading technology likewise as our spirit of innovation,mutual cooperation, benefits and development, we're going to build a prosperous future together with your esteemed enterprise for Lifting Purpose To Be Used With En818 2 Chains , lifting hook with chain , lifting hooks and chains , Welcome to post your sample and color ring to allow us to produce according in your specification.Welcome your inquiry! Seeking ahead to building long-term cooperation along with you!

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List