Communicate with Supplier? Supplier
Zhou weimin Mr. Zhou weimin
What can I do for you?
Contact Supplier

Lifting Eye - manufacturer, factory, supplier from China

(Total 24 Products for Lifting Eye)

  • G80 LARGE OPENNING EYE HOOK

    G80 LARGE OPENNING EYE HOOK

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE FINISH POWDER...

    Contact Now

  • ROUND REVERSE EYE HOOK

    ROUND REVERSE EYE HOOK

    • Model No.: 1.5T 2T

    FORGED CARBON STEEL QUENCHED AND TEMPERED NOT FOR LIFTING REGULAR MARK WLL1

    Contact Now

  • G70 AND G43 EYE GRAB HOOK

    G70 AND G43 EYE GRAB HOOK

    • Model No.: 1/4-3/4

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN G43 ULTIMATE LOAD IS 3 TIMES THE WORKING LOAD LIMIT WHILE G70 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT REGULAR MARK G70 1 4 FORGED G43 G43 HIGH TEST

    Contact Now

  • Rigging G80 Lifting Screw Point/Lifting Points

    Rigging G80 Lifting Screw Point/Lifting Points

    The Size Of A Pallet Is 1 05 0 9 1M And 60CTNS Sacks Or Two Orin Drums Per Pallet Or Wooden

    Contact Now

  • G80 CONTAINER LIFTING CLEVIS LINK

    G80 CONTAINER LIFTING CLEVIS LINK

    • Model No.: 5.3T

    FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR WEB SLING AND G80 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TESTED AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION SURFACE ARE USUALLY YELLOW AND RED ULTIMATE LOAD IS 4 TIMES THE...

    Contact Now

  • G80 CONTAINER LIFTING PRODUCT

    G80 CONTAINER LIFTING PRODUCT

    • Model No.: 12.5T

    FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR WEB SLING AND G80 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TESTED AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION SURFACE ARE USUALLY YELLOW AND RED ULTIMATE LOAD IS 4 TIMES THE...

    Contact Now

  • G80 EYE ELEPHANT FOOT

    G80 EYE ELEPHANT FOOT

    • Model No.: 5T

    SUITABLE FOR G80 LASHING CHAIN FEATURES QUICK AND EASY ASSEMBLY FORGED ALLOY STEEL REGULAR MARK 9MM CE

    Contact Now

  • ALLOY EYE HOOK WITH LATCH

    ALLOY EYE HOOK WITH LATCH

    • Model No.: 3T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED LARGE TROAT OPENING AND SMALL CROSS AREA HIGH STRENGTH AND GOOD DUCTILITY ONLY FOR GENERAL HOIST NOT FOR OVERHEAD LIFTING ULTIMATE LOAD IS 2 TIMES THE WORKING LOAD LIMIT REGULAR MARK WLL3T CE

    Contact Now

  • EYE BEND HOOK LASHING AND PULLING

    EYE BEND HOOK LASHING AND PULLING

    • Model No.: 1.86T 2T 5T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED FORGED ALLOY STEEL QUENCHED AND TEMPERED ONLY FOR LASHING AND PULLING NOT FOR LIFTING REGULAR MARK

    Contact Now

  • A320 EYE HOIST HOOK WITH LATCH

    A320 EYE HOIST HOOK WITH LATCH

    • Model No.: 0.75T-30T

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN BREAKING LOAD IS 5 TIMES THE WLL REGULAR MARK ALLOY WLL1T OR

    Contact Now

  • G43 AND G70 EYE HOOK

    G43 AND G70 EYE HOOK

    • Model No.: 1/4-3/4

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN G43 ULTIMATE LOAD IS 3 TIMES THE WORKING LOAD LIMIT WHILE G70 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT REGULAR MARK G70 1 4 FORGED G43 G43 HIGH TEST

    Contact Now

  • GRADE 80 LIFTING POINT

    GRADE 80 LIFTING POINT

    • Model No.: M6-M48

    FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED 100 MAGNAFLUX CRACK DETECTION BREAKAGE TEST SURFACE FINISH ELECTRO GALVANIZING POWDER PLASTIFIED SAFETY FACTOR 4 1 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT NEVER EXCEED WORKING LOAD LIMIT REGULAR MARK M8 WLL1T CE SLR BATCH

    Contact Now

  • LIFTING RING FOR CONSTRUCTION

    LIFTING RING FOR CONSTRUCTION

    • Model No.: 4T

    100 MAGNAFLUX CRACK DETECTION BREAKAGE TEST SURFACE FINISH ELECTRO GALVANIZING POWDER PLASTIFIED SAFETY FACTOR 4 1 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT NEVER EXCEED WORKING LOAD

    Contact Now

  • CONCRETE PRECAST ELEMENT LIFTING

    CONCRETE PRECAST ELEMENT LIFTING

    • Model No.: 1-1.3T; 1.5-2.5T

    COMPONENT A CAST SUPER ALLOY COMPONENT B FORGED ALLOY STEEL 100 MAGNAFLUX CRACK DETECTION BREAKAGE TEST SURFACE FINISH ELECTRO GALVANIZING POWDER PLASTIFIED SAFETY FACTOR 4 1 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT CAST COMPONENT 1 1 3T FORGED COMPONENT WLL1 1 3T CE SLR BATCH NUMBER NEVER EXCEED WORKING LOAD...

    Contact Now

  • G80 SHACKLES FOR LIFTING PURPOSE

    G80 SHACKLES FOR LIFTING PURPOSE

    • Model No.: 7/8MM,10MM,13MM,16MM

    LOW WEIGHT HIGH STRENGH FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 G80 CHAIN INDIVIDUALLOY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TESTED AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE INDIVIDUALLY INSPECTED AND TESTED SURFACE FINISH...

    Contact Now

  • LATCH KIT FOR SLING HOOK LIFTING

    LATCH KIT FOR SLING HOOK LIFTING

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    LATCH KIT FOR SLING HOOKS CONSISTS OF CASTED LATCH BOLT NUT AND

    Contact Now

  • G80 SLIDING EYE CHOKER HOOK

    G80 SLIDING EYE CHOKER HOOK

    • Model No.: 3/8"-1/2" 5/8" 3/4" 1"

    THE HOOK HAVE A SLIDING EYE THAT CAN BE ASSEMBLIED WITH STEEL WIRE ROPE THE HOOK IS MAINLY USED IN CUTTING DOWN FORESTS THE HOOK IS QUITE STRONG FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TEST AT 1 5 TIMES WORKING LOAD...

    Contact Now

  • G80 DEEP THROAT EYE GRAB HOOK

    G80 DEEP THROAT EYE GRAB HOOK

    • Model No.: 6MM 8MM 10MM

    THE HOOK HAVE A DEEP THROAT IT S QUITE SAFE WHEN LIFTING THE BODY OF THE HOOK IS QUITE STRONG THE HOOK ALSO HAVE CRADLES THAT CAN ADJUST THE LENGTH OF THE CHAINS FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TEST AT 1 5 TIMES...

    Contact Now

  • G80 EYE SHORTENING GRAB HOOK WITH SAFETY PIN

    G80 EYE SHORTENING GRAB HOOK WITH SAFETY PIN

    • Model No.: 8MM 10MM 13MM

    THE HOOK IS NEW TYPE WITH SAFETY PIN THE PIN HAVE SPRING THAT CAN PREVENT GOOD FROM FALLING OFF THE HOOK ALSO HAVE CRADLES THAT CAN SHORTENING THE CHAINS THE BODY OF THE HOOK IS QUITE STRONG FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD...

    Contact Now

  • G80 EYE FOUNDRY HOOK

    G80 EYE FOUNDRY HOOK

    THE HOOK IS A NEW TYPE WITH IMPROVED SHAPE THERE IS A FLAT ON THE CIRCLE THAT CAN BE EASILY USED WITH CHAINS MADE OF HIGH TENSILE STEEL SAFETY HOOK HAVE A STRONG LATCH THAT CAN PROTECT THE PRODUCT FALLING OFF THE HOOK HAVE QUITE LARGE OPENING THAT CAN BE EASILY USED IN LIFTING FORGED SUPER ALLOY STEEL QUENCHED AND...

    Contact Now

  • EYE GRAB HOOK WITH CRADLES GRADE 80

    EYE GRAB HOOK WITH CRADLES GRADE 80

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    MADE OF HIGH TENSILE STEEL GRAB HOOKS HAVE A STRONG BODY AND NARROW OPENNING THE HOOK HAVE CRADLES AT THE TWO SIDES SO IT CAN MATCH WITH LIFTING CHAINS PERFECTLY FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TEST AT 1 5 TIMES...

    Contact Now

  • G80 EYE SLING HOOK WITH CAST LATCH

    G80 EYE SLING HOOK WITH CAST LATCH

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE FINISH POWDER...

    Contact Now

  • G80 PIVOTING LIFTING SCREW

    G80 PIVOTING LIFTING SCREW

    • Model No.: M6 M8 M10 M20 24

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION SURFACE FINISH POWDER PLASTIFIED COLOR CODE YELLOW OR RED RAL3020 OR

    Contact Now

  • G100 SPECIAL EYE GRAB HOOK WITH SAFETY PIN

    G100 SPECIAL EYE GRAB HOOK WITH SAFETY PIN

    • Model No.: 8MM 10MM 13MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN 25 STRONGER THAN G80 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE...

    Contact Now

Review

Nikita Mukhin

Apr 28, 2020 5

I received my Lifting Eye packaged well in a sturdy case. After inspection I am super happy with my purchase! Thanks for Shandong Shenli Rigging Co.,LTD. 's sales staff contacted me to confirm if I need help.
David M Ofoegbu

Apr 22, 2020 5

Surprising, good quality and patient service. I love it. I would buy again and very happy with this purchase.
Andrew Bilsborough

Apr 16, 2020 5

Nice packaging and fast delivery. Includes everything you need to know it.
Our firm since its inception, normally regards item top quality as company life, constantly make improvements to generation technology, improve product excellent and repeatedly strengthen organization total good quality management, in strict accordance with the national standard ISO 9001:2000 for Lifting Eye , lifting eye , Lifting Hook , Till now the items list has been updated regularly and attracted clients from around the globe. In depth facts is often obtained in our web-site and you'll be served with premium quality consultant service by our after-sale group. They will help you get complete acknowledge about our products and solutions and make a satisfied negotiation. Company go to to our factory in Brazil is also welcome at any time. Hope to obtain your inquiries for any pleased co-operation.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List