Communicate with Supplier? Supplier
Zhou weimin Mr. Zhou weimin
What can I do for you?
Contact Supplier

G80 Rigging Hardware - manufacturer, factory, supplier from China

(Total 24 Products for G80 Rigging Hardware)

  • G80 OMEGA LINK WITH BLACK PIN

    G80 OMEGA LINK WITH BLACK PIN

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE FINISH POWDER...

    Contact Now

  • G80 LARGE OPENNING EYE HOOK

    G80 LARGE OPENNING EYE HOOK

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE FINISH POWDER...

    Contact Now

  • G80 HIGH QUALITY CLEVIS CLUTCH

    G80 HIGH QUALITY CLEVIS CLUTCH

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM

    THIS PRODUCT IS DESIGNED TO BE USED WITH CHAINS IT CAN ADJUST THE LENGTH OF THE CHAINS THE CLEVIS HEAD CAN BE USED WITH OTHER FITTINGS FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR...

    Contact Now

  • G80 CLEVIS LINK /PEARSHAPE LINK

    G80 CLEVIS LINK /PEARSHAPE LINK

    • Model No.: 8MM 10MM 13MM 16MM 18MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE FINISH POWDER...

    Contact Now

  • G80 Clevis Slip Hook With Cast Latch
  • G80 CLEVIS CLUTH WITH SAFETY PIN

    G80 CLEVIS CLUTH WITH SAFETY PIN

    • Model No.: 8MM 10MM 13MM

    THIS PRODUCT IS DESIGNED TO BE USED WITH CHAINS IT CAN ADJUST THE LENGTH OF THE CHAINS THE CLEVIS HEAD CAN BE USED WITH OTHER FITTINGS IT ALSO HAVE SAFETY PIN TO ENSURE THE SAFETY IN LIFTING FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD...

    Contact Now

  • G80 DEEP THROAT CLEVIS GRAB HOOK

    G80 DEEP THROAT CLEVIS GRAB HOOK

    • Model No.: 6MM 8MM 10MM 13MM

    THE HOOK HAVE A DEEP THROAT IT S QUITE SAFE WHEN LIFTING THE BODY OF THE HOOK IS QUITE STRONG THE HOOK ALSO HAVE CRADLES THAT CAN ADJUST THE LENGTH OF THE CHAINS FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TEST AT 1 5 TIMES...

    Contact Now

  • G80 IMPROVED SWIVEL SELFLOCK HOOK

    G80 IMPROVED SWIVEL SELFLOCK HOOK

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    MADE OF HIGH TENSILE STEEL SAFETY HOOK HAVE A STRONG LATCH THAT CAN PROTECT THE PRODUCT FALLING OFF THE HOOK HAVE SAFETY FITTINGS THAT CAN BE CHANGED EASILY THE HOOK CAN BE SWIVEL AT 360 DEGREE WE MAKE A NEW DESIGN TO MAKE SURE THE HOOK WILL NOT CLOSE WHEN IT IS OPENED SO IT S QUITE CONVINIENT TO OPERATE AND IT S MORE...

    Contact Now

  • G80 IMPROVED CLEVIS SELFLOCK HOOK

    G80 IMPROVED CLEVIS SELFLOCK HOOK

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    MADE OF HIGH TENSILE STEEL SAFETY HOOK HAVE A STRONG LATCH THAT CAN PROTECT THE PRODUCT FALLING OFF THE HOOK HAVE SAFETY FITTINGS THAT CAN BE CHANGED EASILY FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TEST AT 1 5 TIMES...

    Contact Now

  • G80 MASTER LINK ASSEMBLY U.S TYPE A-343

    G80 MASTER LINK ASSEMBLY U.S TYPE A-343

    • Model No.: 3/4" TO 2-3/4"

    MADE OF HIGH TENSILE ALLOY STEELS QUENCHED AND TEMPERED EVERY PIECE WILL BE PROOF TESTED AT 2 TIMES THE WORKING LOAD LIMIT 100 MAGNAFLUX CRACK DETECTION THE SURFACES ARE USUALLY YELLOW PAINTED AND RED PAINTED WHILE CUSTOMERS CAN CHOOSE OTHER COLORS ACCORDING TO RAL COLORS THE LINKS CAN BE ALSO PRESSED WITH FLAT ON...

    Contact Now

  • G80 U.S TYPE FORGED MASTER LINK

    G80 U.S TYPE FORGED MASTER LINK

    • Model No.: 1/2", 5/8" 3/4", 2"

    MADE OF HIGH TENSILE ALLOY STEELS QUENCHED AND TEMPERED EVERY PIECE WILL BE PROOF TESTED AT 2 TIMES THE WORKING LOAD LIMIT 100 MAGNAFLUX CRACK DETECTION THE SURFACES ARE USUALLY YELLOW PAINTED AND RED PAINTED WHILE CUSTOMERS CAN CHOOSE OTHER COLORS ACCORDING TO RAL COLORS THE LINKS CAN BE ALSO PRESSED WITH FLAT ON...

    Contact Now

  • G80 CLEVIS SLING HOOK WITH LATCH

    G80 CLEVIS SLING HOOK WITH LATCH

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE FINISH POWDER...

    Contact Now

  • A339 G80 Clevis Sling Hoist Hook
  • Rigging G80 Lifting Screw Point/Lifting Points

    Rigging G80 Lifting Screw Point/Lifting Points

    The Size Of A Pallet Is 1 05 0 9 1M And 60CTNS Sacks Or Two Orin Drums Per Pallet Or Wooden

    Contact Now

  • G80 CLEVIS SHORTENING GRAB HOOK WITH SAFETY PIN

    G80 CLEVIS SHORTENING GRAB HOOK WITH SAFETY PIN

    THE HOOK IS NEW TYPE WITH SAFETY PIN THE PIN HAVE SPRING THAT CAN PREVENT GOOD FROM FALLING OFF THE HOOK ALSO HAVE CRADLES THAT CAN SHORTENING THE CHAINS THE BODY OF THE HOOK IS QUITE STRONG FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD...

    Contact Now

  • G80 CONTAINER LIFTING CLEVIS LINK

    G80 CONTAINER LIFTING CLEVIS LINK

    • Model No.: 5.3T

    FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR WEB SLING AND G80 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TESTED AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION SURFACE ARE USUALLY YELLOW AND RED ULTIMATE LOAD IS 4 TIMES THE...

    Contact Now

  • G80 CONTAINER LIFTING PRODUCT

    G80 CONTAINER LIFTING PRODUCT

    • Model No.: 12.5T

    FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR WEB SLING AND G80 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TESTED AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION SURFACE ARE USUALLY YELLOW AND RED ULTIMATE LOAD IS 4 TIMES THE...

    Contact Now

  • G80 EYE ELEPHANT FOOT

    G80 EYE ELEPHANT FOOT

    • Model No.: 5T

    SUITABLE FOR G80 LASHING CHAIN FEATURES QUICK AND EASY ASSEMBLY FORGED ALLOY STEEL REGULAR MARK 9MM CE

    Contact Now

  • G80 CLEVIS ELEPHANT FOOT

    G80 CLEVIS ELEPHANT FOOT

    • Model No.: 5T

    SUITABLE FOR G80 LASHING CHAIN FEATURES QUICK AND EASY ASSEMBLY FORGED ALLOY STEEL REGULAR MARK 9MM CE

    Contact Now

  • G80 LASHING TYPE C HOOK WITH SPRING PIN

    G80 LASHING TYPE C HOOK WITH SPRING PIN

    • Model No.: 9MM 11MM 13MM

    SUITABLE FOR G80 LASHING CHAIN FEATURES QUICK AND EASY ASSEMBLY FORGED ALLOY STEEL REGULAR MARK 9MM CE

    Contact Now

  • G80 SHACKLES FOR LIFTING PURPOSE

    G80 SHACKLES FOR LIFTING PURPOSE

    • Model No.: 7/8MM,10MM,13MM,16MM

    LOW WEIGHT HIGH STRENGH FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 G80 CHAIN INDIVIDUALLOY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TESTED AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE INDIVIDUALLY INSPECTED AND TESTED SURFACE FINISH...

    Contact Now

  • G80 CLEVIS GRAB HOOK WITH CRADLE

    G80 CLEVIS GRAB HOOK WITH CRADLE

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    MADE OF HIGH TENSILE STEEL GRAB HOOKS HAVE A STRONG BODY AND NARROW OPENNING THE HOOK HAVE CRADLES AT THE TWO SIDES SO IT CAN MATCH WITH LIFTING CHAINS PERFECTLY FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TEST AT 1 5 TIMES...

    Contact Now

  • G80 TYPE CLEVIS FOREST HOOK WITH CLVIS HEAD

    G80 TYPE CLEVIS FOREST HOOK WITH CLVIS HEAD

    • Model No.: 6MM 7/8MM 10MM 13MM

    THE HOOK HAVE A SMALL OPENING THAT CAN ENSURE THE SAFETY LIFTING THE HOOK IS MAINLY USED IN CUTTING DOWN FORESTS THE HOOK IS QUITE STRONG FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR...

    Contact Now

  • G80 CLEVIS HOOK LARGE OPENING WITH CLEVIS HEAD

    G80 CLEVIS HOOK LARGE OPENING WITH CLEVIS HEAD

    • Model No.: 7/8MM 10MM 13MM 16MM

    THE HOOK HAVE A LARGE OPENING THAT CAN BE EASILY USED WITH OTHER LIFTING EQUIPMENT THE HOOK IS MAINLY USED IN CUTTING DOWN FORESTS THE HOOK IS QUITE STRONG FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TEST AT 1 5 TIMES...

    Contact Now

Review

Arbain Sahir

Nov 26, 2019 5

Superb technology, perfect after-sales service and efficient work efficiency, we think this is our best choice.Definitely will purchase more G80 Rigging Hardware from Shandong Shenli Rigging Co.,LTD. company again!
Robson Pineda

Nov 18, 2019 5

G80 Rigging Hardware have favourable price.Thanks
Victor Moreno

Nov 16, 2019 5

fast shipping, good quailty.I will definitely recommend Shandong Shenli Rigging Co.,LTD. to all and come back again.
As we're moving for G80 Rigging Hardware , G70 Rigging Hardware , G43 Rigging Hardware , high-quality and successful company to satisfy your requirements.
Our advantages are lessen charges,dynamic income team,specialized QC,sturdy factories,premium quality services for G80 Rigging Hardware , G70 Rigging Hardware , G43 Rigging Hardware , Our products are mainly exported to Southeast Asia, the Middle East, North America, and Europe. Our quality is surely guaranteed. If you are interested in any of our items or would like to discuss a custom order you should feel free to contact us. We're looking forward to forming successful business relationships with new clients around the world in the near future.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.