Communicate with Supplier? Supplier
Zhou weimin Mr. Zhou weimin
What can I do for you?
Contact Supplier

G70 Grab Hook - manufacturer, factory, supplier from China

(Total 24 Products for G70 Grab Hook)

  • G80 LARGE OPENNING EYE HOOK

    G80 LARGE OPENNING EYE HOOK

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE FINISH POWDER...

    Contact Now

  • FORGED SORTING HOOK RED PAINTED

    FORGED SORTING HOOK RED PAINTED

    • Model No.: 2T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT WOKRING LOAD LIMIT AT THE TIP OF THE HOOK IS 2T WORKING LAOD LIMIT AT THE BOTTOM OF HOOK IS 6 8T REGULAR MARK IS

    Contact Now

  • G80 Clevis Slip Hook With Cast Latch
  • ROUND REVERSE EYE HOOK

    ROUND REVERSE EYE HOOK

    • Model No.: 1.5T 2T

    FORGED CARBON STEEL QUENCHED AND TEMPERED NOT FOR LIFTING REGULAR MARK WLL1

    Contact Now

  • ALLOY FORGED HOOK FISHING TYPE

    ALLOY FORGED HOOK FISHING TYPE

    • Model No.: 3T-20T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED FOR FISHING USAGE REGULAR MARK WLL8T CE ULTIMATE LOAD IS 5 TIMES THE WORKING LOAD

    Contact Now

  • G70 AND G43 EYE GRAB HOOK

    G70 AND G43 EYE GRAB HOOK

    • Model No.: 1/4-3/4

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN G43 ULTIMATE LOAD IS 3 TIMES THE WORKING LOAD LIMIT WHILE G70 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT REGULAR MARK G70 1 4 FORGED G43 G43 HIGH TEST

    Contact Now

  • G70 AND G43 CLEVIS GRAB HOOK

    G70 AND G43 CLEVIS GRAB HOOK

    • Model No.: 1/4-3/4

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN G43 ULTIMATE LOAD IS 3 TIMES THE WORKING LOAD LIMIT WHILE G70 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT REGULAR MARK G70 1 4 FORGED G43 G43 HIGH TEST

    Contact Now

  • G80 DEEP THROAT CLEVIS GRAB HOOK

    G80 DEEP THROAT CLEVIS GRAB HOOK

    • Model No.: 6MM 8MM 10MM 13MM

    THE HOOK HAVE A DEEP THROAT IT S QUITE SAFE WHEN LIFTING THE BODY OF THE HOOK IS QUITE STRONG THE HOOK ALSO HAVE CRADLES THAT CAN ADJUST THE LENGTH OF THE CHAINS FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TEST AT 1 5 TIMES...

    Contact Now

  • G80 IMPROVED SWIVEL SELFLOCK HOOK

    G80 IMPROVED SWIVEL SELFLOCK HOOK

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    MADE OF HIGH TENSILE STEEL SAFETY HOOK HAVE A STRONG LATCH THAT CAN PROTECT THE PRODUCT FALLING OFF THE HOOK HAVE SAFETY FITTINGS THAT CAN BE CHANGED EASILY THE HOOK CAN BE SWIVEL AT 360 DEGREE WE MAKE A NEW DESIGN TO MAKE SURE THE HOOK WILL NOT CLOSE WHEN IT IS OPENED SO IT S QUITE CONVINIENT TO OPERATE AND IT S MORE...

    Contact Now

  • G80 IMPROVED CLEVIS SELFLOCK HOOK

    G80 IMPROVED CLEVIS SELFLOCK HOOK

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    MADE OF HIGH TENSILE STEEL SAFETY HOOK HAVE A STRONG LATCH THAT CAN PROTECT THE PRODUCT FALLING OFF THE HOOK HAVE SAFETY FITTINGS THAT CAN BE CHANGED EASILY FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TEST AT 1 5 TIMES...

    Contact Now

  • G80 CLEVIS SLING HOOK WITH LATCH

    G80 CLEVIS SLING HOOK WITH LATCH

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE FINISH POWDER...

    Contact Now

  • A339 G80 Clevis Sling Hoist Hook
  • G80 CLEVIS SHORTENING GRAB HOOK WITH SAFETY PIN

    G80 CLEVIS SHORTENING GRAB HOOK WITH SAFETY PIN

    THE HOOK IS NEW TYPE WITH SAFETY PIN THE PIN HAVE SPRING THAT CAN PREVENT GOOD FROM FALLING OFF THE HOOK ALSO HAVE CRADLES THAT CAN SHORTENING THE CHAINS THE BODY OF THE HOOK IS QUITE STRONG FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD...

    Contact Now

  • G80 LASHING TYPE C HOOK WITH SPRING PIN

    G80 LASHING TYPE C HOOK WITH SPRING PIN

    • Model No.: 9MM 11MM 13MM

    SUITABLE FOR G80 LASHING CHAIN FEATURES QUICK AND EASY ASSEMBLY FORGED ALLOY STEEL REGULAR MARK 9MM CE

    Contact Now

  • FORGED GRAB HOOK WITH SWIVEL

    FORGED GRAB HOOK WITH SWIVEL

    • Model No.: 3.8T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED LARGE TROAT OPENING AND SMALL CROSS AREA HIGH STRENGTH AND GOOD DUCTILITY ONLY FOR GENERAL HOIST NOT FOR OVERHEAD LIFTING ULTIMATE LOAD IS 2 TIMES THE WORKING LOAD LIMIT REGULAR MARK 8MM WLL3

    Contact Now

  • LARGE OPENING HOOK LONG BODY

    LARGE OPENING HOOK LONG BODY

    • Model No.: 1.5T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED LARGE TROAT OPENING AND SMALL CROSS AREA HIGH STRENGTH AND GOOD DUCTILITY ONLY FOR GENERAL HOIST NOT FOR OVERHEAD LIFTING ULTIMATE LOAD IS 2 TIMES THE WORKING LOAD LIMIT REGULAR MARK WLL3T CE

    Contact Now

  • ALLOY EYE HOOK WITH LATCH

    ALLOY EYE HOOK WITH LATCH

    • Model No.: 3T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED LARGE TROAT OPENING AND SMALL CROSS AREA HIGH STRENGTH AND GOOD DUCTILITY ONLY FOR GENERAL HOIST NOT FOR OVERHEAD LIFTING ULTIMATE LOAD IS 2 TIMES THE WORKING LOAD LIMIT REGULAR MARK WLL3T CE

    Contact Now

  • LARGE OPENING HOOK WITH SAFETY LATCH

    LARGE OPENING HOOK WITH SAFETY LATCH

    • Model No.: 3.2T 3.1T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED LARGE TROAT OPENING AND SMALL CROSS AREA HIGH STRENGTH AND GOOD DUCTILITY ONLY FOR GENERAL HOIST NOT FOR OVERHEAD LIFTING ULTIMATE LOAD IS 2 TIMES THE WORKING LOAD

    Contact Now

  • EYE BEND HOOK LASHING AND PULLING

    EYE BEND HOOK LASHING AND PULLING

    • Model No.: 1.86T 2T 5T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED FORGED ALLOY STEEL QUENCHED AND TEMPERED ONLY FOR LASHING AND PULLING NOT FOR LIFTING REGULAR MARK

    Contact Now

  • FORGED BARREL HOOK 1T AND 2T

    FORGED BARREL HOOK 1T AND 2T

    • Model No.: 1T 2T

    FORGED CARBON STEEL QUENCHED AND TEMPERED ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT REGULAR MARK WLL1T THE HOOK IS USED TO LIFT DRUMS AND

    Contact Now

  • FORGED SHANK HOOK ALLOY AND CARBON STEEL

    FORGED SHANK HOOK ALLOY AND CARBON STEEL

    • Model No.: 0.75T TO 15T

    AVAILABLE IN CARBON STEEL AND ALLOY STEEL FORGED QUENCHED AND TEMPERED ALLOY STEEL ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT CARBON STEEL ULTIMATE LOAD IS 5 TIMES THE WORKING LOAD LIMIT THE HOOK HAVE SHANK AND

    Contact Now

  • HEAVY WINCH HOOK ALLOY STEEL

    HEAVY WINCH HOOK ALLOY STEEL

    • Model No.: 1-1/8

    FORGED ALLOY STEEL QUENCHED AND TEMPERED THE HOOK BODY IS QUITE SRTONG TO ENSURE SAFETY LIFTING IT S MAKE OF HIGH TENSILE ALLOY STEEL REGULAR MARK IS WLL5

    Contact Now

  • A322 FROGED SWIVEL HOOK WITH BEARING

    A322 FROGED SWIVEL HOOK WITH BEARING

    • Model No.: 0.75T-30T

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN BREAKING LOAD IS CARBON STEEL 5 TIMES THE WLL ALLOY STEEL 5 TIMES THE WLL REGULAR MARK ALLOY WLL1T OR

    Contact Now

  • A320 EYE HOIST HOOK WITH LATCH

    A320 EYE HOIST HOOK WITH LATCH

    • Model No.: 0.75T-30T

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN BREAKING LOAD IS 5 TIMES THE WLL REGULAR MARK ALLOY WLL1T OR

    Contact Now

Review

Sheldon Weatherburn

Dec 30, 2019 5

I was quite surprised how high quality this G70 Grab Hook was for the price.
Mr.rana Mohammad Afzal

Dec 27, 2019 5

checked the G70 Grab Hook , everything is ok.
Khardene Blake

Dec 19, 2019 5

Excellent seller and provided good communication and support.So glad to meet Shandong Shenli Rigging Co.,LTD. company.
"Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs for G70 Grab Hook , G80 Grab Hook , G80 Safety Hook , Qualified R&D engineer will be there for your consultation service and we will try our best to meet your requirements. So please feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we will surely give you the best quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success we will make our best efforts to build a solid co-operation and transparent communication work with our companions. Above all we are here to welcome your inquiries for any of our goods and service.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.