Communicate with Supplier? Supplier
Zhou weimin Mr. Zhou weimin
What can I do for you?
Contact Supplier

Black Screw Eye Hooks - manufacturer, factory, supplier from China

(Total 24 Products for Black Screw Eye Hooks)

  • G80 OMEGA LINK WITH BLACK PIN

    G80 OMEGA LINK WITH BLACK PIN

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE FINISH POWDER...

    Contact Now

  • G80 LARGE OPENNING EYE HOOK

    G80 LARGE OPENNING EYE HOOK

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE FINISH POWDER...

    Contact Now

  • ROUND REVERSE EYE HOOK

    ROUND REVERSE EYE HOOK

    • Model No.: 1.5T 2T

    FORGED CARBON STEEL QUENCHED AND TEMPERED NOT FOR LIFTING REGULAR MARK WLL1

    Contact Now

  • G70 AND G43 EYE GRAB HOOK

    G70 AND G43 EYE GRAB HOOK

    • Model No.: 1/4-3/4

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN G43 ULTIMATE LOAD IS 3 TIMES THE WORKING LOAD LIMIT WHILE G70 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT REGULAR MARK G70 1 4 FORGED G43 G43 HIGH TEST

    Contact Now

  • Rigging G80 Lifting Screw Point/Lifting Points

    Rigging G80 Lifting Screw Point/Lifting Points

    The Size Of A Pallet Is 1 05 0 9 1M And 60CTNS Sacks Or Two Orin Drums Per Pallet Or Wooden

    Contact Now

  • G80 EYE ELEPHANT FOOT

    G80 EYE ELEPHANT FOOT

    • Model No.: 5T

    SUITABLE FOR G80 LASHING CHAIN FEATURES QUICK AND EASY ASSEMBLY FORGED ALLOY STEEL REGULAR MARK 9MM CE

    Contact Now

  • ALLOY EYE HOOK WITH LATCH

    ALLOY EYE HOOK WITH LATCH

    • Model No.: 3T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED LARGE TROAT OPENING AND SMALL CROSS AREA HIGH STRENGTH AND GOOD DUCTILITY ONLY FOR GENERAL HOIST NOT FOR OVERHEAD LIFTING ULTIMATE LOAD IS 2 TIMES THE WORKING LOAD LIMIT REGULAR MARK WLL3T CE

    Contact Now

  • EYE BEND HOOK LASHING AND PULLING

    EYE BEND HOOK LASHING AND PULLING

    • Model No.: 1.86T 2T 5T

    FORGED ALLOY STEEL QUENCHED AND TEMPERED FORGED ALLOY STEEL QUENCHED AND TEMPERED ONLY FOR LASHING AND PULLING NOT FOR LIFTING REGULAR MARK

    Contact Now

  • A320 EYE HOIST HOOK WITH LATCH

    A320 EYE HOIST HOOK WITH LATCH

    • Model No.: 0.75T-30T

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN BREAKING LOAD IS 5 TIMES THE WLL REGULAR MARK ALLOY WLL1T OR

    Contact Now

  • G43 AND G70 EYE HOOK

    G43 AND G70 EYE HOOK

    • Model No.: 1/4-3/4

    FORGED ALLOY STEEL CARBON STEEL QUENCHED AND TEMPERED SUITABLE FOR G70 AND G43 CHAIN G43 ULTIMATE LOAD IS 3 TIMES THE WORKING LOAD LIMIT WHILE G70 ULTIMATE LOAD IS 4 TIMES THE WORKING LOAD LIMIT REGULAR MARK G70 1 4 FORGED G43 G43 HIGH TEST

    Contact Now

  • HIGH STRENGTH SCREW PIN DEE SHACKLE

    HIGH STRENGTH SCREW PIN DEE SHACKLE

    • Model No.: 1/4 TO 2-1/2

    FOR LIFTING APPLICATION FORGED QUENCHED AND TEMPERED BOW BODY FURFISH HOT DIP GALVANIZING OR ELECTRIO GALVANIZING NUT SURFACE FINISH ELECTRO GALVANIZING BOLT SURFACE FINISH HOT DIP GALVANIZING ELECTOR GALVANIZING OR POWDER PLASTIFIED REGULAR MARKING IS SIZE WLL CE SLR ULTIMATE LOAD IS 6 TIMES THE WORKING LOAD LIMIT...

    Contact Now

  • G8 SCREW PIN ALLOY DEE SHACKLE

    G8 SCREW PIN ALLOY DEE SHACKLE

    • Model No.: 7/8 TO 2

    BODY IS MADE OF SUPER ALLOY STEEL QUENCHED AND TEMPERD THE SHACKLES ARE WITH STRONG BOLT NUT AND COLLAR PIN TO ENSURE THE SAFETY CONNECTING BREAKAGE TESTED FOR EVERY BATCH 100 MAGNAFLUX CRACK DETECTION PERMITTED USEFUL TEMPERATURE RANGE 40O 2000 ULTIMATE LOAD IS 5 TIMES THE WORKING LOAD

    Contact Now

  • G8 SCREW PIN ALLOY BOW SHACKLE

    G8 SCREW PIN ALLOY BOW SHACKLE

    • Model No.: 5/16 TO 2"

    BODY IS MADE OF SUPER ALLOY STEEL QUENCHED AND TEMPERD BREAKAGE TESTED FOR EVERY BATCH 100 MAGNAFLUX CRACK DETECTION PERMITTED USEFUL TEMPERATURE RANGE 40O 2000 ULTIMATE LOAD IS 5 TIMES THE WORKING LOAD

    Contact Now

  • SPARE PARTS FOR CLEVIS HOOKS

    SPARE PARTS FOR CLEVIS HOOKS

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    SPARE PART OF BERGLOK AND CLEVIS TYPE FITTINGS CONSISTING OF ONE LOAD PIN AND TWO LOCKING

    Contact Now

  • CASTED LATCH KIT FOR SLING HOOKS

    CASTED LATCH KIT FOR SLING HOOKS

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    LATCH KIT FOR SLING HOOKS CONSISTS OF CASTED LATCH PIN OR RIVET AND SCREW BOLT AND

    Contact Now

  • ZINC PLATED LATCH KIT FOR SLING HOOKS

    ZINC PLATED LATCH KIT FOR SLING HOOKS

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    SPARE PARTS FOR CLEVIS SLING HOOK AND EYE SLING HOOK CONSISTS OF LATCH BOLT NUT AND

    Contact Now

  • G80 SLIDING EYE CHOKER HOOK

    G80 SLIDING EYE CHOKER HOOK

    • Model No.: 3/8"-1/2" 5/8" 3/4" 1"

    THE HOOK HAVE A SLIDING EYE THAT CAN BE ASSEMBLIED WITH STEEL WIRE ROPE THE HOOK IS MAINLY USED IN CUTTING DOWN FORESTS THE HOOK IS QUITE STRONG FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TEST AT 1 5 TIMES WORKING LOAD...

    Contact Now

  • G80 DEEP THROAT EYE GRAB HOOK

    G80 DEEP THROAT EYE GRAB HOOK

    • Model No.: 6MM 8MM 10MM

    THE HOOK HAVE A DEEP THROAT IT S QUITE SAFE WHEN LIFTING THE BODY OF THE HOOK IS QUITE STRONG THE HOOK ALSO HAVE CRADLES THAT CAN ADJUST THE LENGTH OF THE CHAINS FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TEST AT 1 5 TIMES...

    Contact Now

  • G80 EYE SHORTENING GRAB HOOK WITH SAFETY PIN

    G80 EYE SHORTENING GRAB HOOK WITH SAFETY PIN

    • Model No.: 8MM 10MM 13MM

    THE HOOK IS NEW TYPE WITH SAFETY PIN THE PIN HAVE SPRING THAT CAN PREVENT GOOD FROM FALLING OFF THE HOOK ALSO HAVE CRADLES THAT CAN SHORTENING THE CHAINS THE BODY OF THE HOOK IS QUITE STRONG FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD...

    Contact Now

  • G80 EYE FOUNDRY HOOK

    G80 EYE FOUNDRY HOOK

    THE HOOK IS A NEW TYPE WITH IMPROVED SHAPE THERE IS A FLAT ON THE CIRCLE THAT CAN BE EASILY USED WITH CHAINS MADE OF HIGH TENSILE STEEL SAFETY HOOK HAVE A STRONG LATCH THAT CAN PROTECT THE PRODUCT FALLING OFF THE HOOK HAVE QUITE LARGE OPENING THAT CAN BE EASILY USED IN LIFTING FORGED SUPER ALLOY STEEL QUENCHED AND...

    Contact Now

  • G80 SWIVEL HOOKS WITH SAFETY LATCH

    G80 SWIVEL HOOKS WITH SAFETY LATCH

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    MADE OF HIGH TENSILE STEEL SAFETY HOOK HAVE A STRONG LATCH THAT CAN PROTECT THE PRODUCT FALLING OFF THE HOOK HAVE SAFETY FITTINGS THAT CAN BE CHANGED EASILY THE HOOK CAN BE SWIVEL AT 360 DEGREE FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD...

    Contact Now

  • EYE GRAB HOOK WITH CRADLES GRADE 80

    EYE GRAB HOOK WITH CRADLES GRADE 80

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    MADE OF HIGH TENSILE STEEL GRAB HOOKS HAVE A STRONG BODY AND NARROW OPENNING THE HOOK HAVE CRADLES AT THE TWO SIDES SO IT CAN MATCH WITH LIFTING CHAINS PERFECTLY FORGED SUPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR EN818 2 CAHINS INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIUGE TEST AT 1 5 TIMES...

    Contact Now

  • G80 EYE SLING HOOK WITH CAST LATCH

    G80 EYE SLING HOOK WITH CAST LATCH

    • Model No.: 6MM 8MM 10MM 13MM 16MM 20MM 22MM 26MM 32MM

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED SUITABLE FOR G100 CHAIN EN818 2 INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION ALL LOAD PINS ARE 100 INDIVIDUALLY INSPECTED AND TEST SURFACE FINISH POWDER...

    Contact Now

  • G80 PIVOTING LIFTING SCREW

    G80 PIVOTING LIFTING SCREW

    • Model No.: M6 M8 M10 M20 24

    FORGED SUPPER ALLOY STEEL QUENCHED AND TEMPERED INDIVIDUALLY PROOF TEST AT 2 5 TIMES WORKING LOAD LIMIT FATIGUE TEST AT 1 5 TIMES WORKING LOAD LIMIT FOR 20000 CYCLES BREAKAGE TEST 100 MAGNAFLUX CRACK DETECTION SURFACE FINISH POWDER PLASTIFIED COLOR CODE YELLOW OR RED RAL3020 OR

    Contact Now

Review

Mohamed Mubarak

Apr 25, 2020 4

I am very impressed with the Black Screw Eye Hooks . There was zero damage. I had some minor difficulties and the seller responded to my questions very quickly (taking into account the time-zone differences).
Vanessa Caba

Apr 18, 2020 5

Many thanks! the Black Screw Eye Hooks is indeed what I want. I am very satisfied!
Mrs.mariano

Apr 07, 2020 5

ok! shipping fast. all Black Screw Eye Hooks in place.
We always believe that one's character decides products' quality, the details decides products' quality ,with the REALISTIC,EFFICIENT AND INNOVATIVE team spirit for Black Screw Eye Hooks , black screw eye hooks , large eye hooks , We warmly welcome you to set up cooperation and generate a bright long term together with us.
We depend on sturdy technical force and continually create sophisticated technologies to satisfy the demand of Black Screw Eye Hooks , black screw eye hooks , large eye hooks , We have won a good reputation among overseas and domestic clients. Adhering to the management tenet of "credit oriented customer first high efficiency and mature services" we warmly welcome friends from all walks of life to cooperate with us.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List